PotterVilla Adventures
  • Home
  • Categories
    • Annoucements
    • Christmas
    • Fall
    • Garden
    • Jonathan
    • Matthew
    • Miscellaneous
    • Spring
    • Weather
    • Winter
  • By Matthew
  • By Jonathan

Aug 8 2008

An Awesome Opportunity

Posted by Matthew
Tweet

Some interesting things have been happening around here lately. Here’s the run down.

Yesterday morning my next batch of broiler chicks arrived. I’m trying something a little different this time–I borrowed a stock tank to keep the chicks in for the first few days. Right now they’re in the garage, and the tank is working out a lot better than the cardboard box I’ve tried in the past. It’s been pretty warm (in the mid to upper 80’s [great weather for mowing away hay in the back corner of the barn where’s there’s no breeze!]) and although it’s cooled down some, it is still warm enough that the chicks don’t need nearly as much supplemental heat as my previous batches did. So my plan is that after the first few days of having them in the tank on newspaper and wood shavings, I’ll move them right out onto the grass in the big broiler pen. I imagine that I’ll still have to keep the heat lamp with them, but I think that the earlier that they’re exposed to grass and dirt the better they’ll do over all.

Now that the chicks are here and requiring attention, I’ve been staying home rather than going over to the Williams farm (that’s where I was helping mow away hay on 90 degree days–the weather really has been quite good for hay this year–really good rains, but enough hot, dry days too, although we’re a touch dry now.) After working over there and always being busy, now that I’m home I’m actually getting kinda bored. I guess I ought to make up a list of projects to work on. The gardens are disappointing me this year. We’re only just now starting to get yellow tomatoes, the beans aren’t producing as well as I’d hoped, (not to mention the fact that they didn’t come up very well in the first place) the peas…(where to begin) I’ve replanted them twice and the few that did come up are doing really poorly. The pop corn that I planted at a friend’s house–I put it down on the low ground because it looked like a dry year–is still yellow and not much over knee high because it’s so wet down there! Oh, bother………………..

On a brighter note, Grama is coming up from Florida. She’ll be arriving tomorrow at 11:08 am at the Lansing airport, so Mom and I are going in to pick her up (and make the traditional run to Gordon Foods and Horrock’s, plus look for another pair of high top shoes for me (it seems that hog manure is hard on synthetic soles and such)). Now this is the game playing Grama–we always have a ball with her. Cribbage, Uno, Triominoes, Dominoes, Farkle, Skip-Bo, Phase Ten, and Phase Ten Dice are all favorites that are usually well played before she has to leave. (Just for the disclaimer–yes we do still get a few things accomplished–she’s also the sewing, weeding/gardening and walking Grama) We always look forward to her visits. Plus with the recent medical circumstances she wasn’t able to make it up at Christmas, so it’s been quite awhile since we’ve seen her.

Well, on to our Awesome Opportunity. On Monday afternoon of this week, we received a certified letter sent by FedEx–the letter was a “Warn Notice” from Von Wise–the company that currently owns the business where Dad works. Or I should actually say used to work. Tuesday was his last day of work. The whole company is folding up (unless by some minuscule chance they find a buyer), production is keeping going until the parts in stock run out, and then they’ll be laid off as well. So we now have an Awesome Opportunity to trust God to provide and protect. Since the lay off was so sudden–Monday afternoon we got the letter, Monday night (due to rumors that there would be guards and locked buildings in the morning) we all went in and helped Dad clean out his desk, Tuesday morning there was a meeting, and 120+ people (out of about 212) were laid off–it’s quite a shock to the system. The company was on the news and everything. He doesn’t get any severance pay, but he does get the rest of his vacation paid–which is about three weeks. The insurance will run out on the 15th, so Mom’s been trying to make sure we’re all caught up on routine medical stuff–eye doctor appointments etc. So now we’re trusting God to provide a new job for Dad, and in the mean time see if there is any way in which we need to try to cut back and live more frugally. We don’t think that we’ll have to make any major lifestyle changes, since we already try to live sensibly.

Overall, we are in good shape, both financially and (more importantly) Spiritually. I believe that the days ahead will be an excellent time to draw closer to each other as a family, and to God as we trust Him to supply our needs (in a more direct way than usual). It will also be an opportunity to be an example to the world of faith and perseverance in times of trouble. It’s also a good time to have a big garden :-) (even if it isn’t doing the best) Now if I could just convince Mom and Dad to get a Jersey milk cow….. ;-) …and a couple of pigs, a horse or two, some cattle and a few sheep…Oh, and a few hundred (or thousand) acres would be nice too :-) (Ah well, a guy can dream, can’t he?)

Well that’s all the news that news worthy (I try to be more discriminating than the liberal media :-) ), so I’ll sign off for now,

Y’all take care now, and remember that there is always peace in the shadow of His wings.

Matthew

Tags: Chicks, Dad, Garden, God is Good, Grama, Matthew
CONTINUE READING >
1 comment
Jun 28 2008

Chicken Plucking Report

Posted by Matthew
Tweet

This morning I took the plucker over to some friend’s house and helped butcher their 30 some odd Cornish Cross birds. I got there just before seven a.m. and then set up (including screwing the cones to the stand thingy) and we were done (including clean up and putting all of the stuff back into the truck) by 11:45 a.m. The plucker worked beautifully. The vote was unanimous that it saved many, many hours in the plucking department. The last time they did chickens they borrowed a table style plucker–it made a real mess and didn’t really do a very good job. The birds were plucked once on the machine, two or three times by the eviscerators (sp?) once in the house–where they cut them up and packaged them-–and then once before you put them in the pot to cook! With the Whizbang method the machine plucked them once and then the people pulled out a few tail feathers and that was it! It took me a few times to get the scalding down, but once I “mastered” (really I’m no where close) that it was a breeze.

Well I’ve been getting up at five or six for the past week or so and not going to sleep unitl midnight so I’m kinda tired (slept for two hours on the couch and still feel like I could sleep for a week) so that’s it for now.

Matthew

Tags: Matthew, Plucker
CONTINUE READING >
1 comment
Jun 20 2008

A Completed Chicken Plucker and a few Other Thoughts

Posted by Matthew
Tweet

It’s quite chilly this morning. We open the windows last night because it’s supposed to get up close to 80 degrees today but as I sit here at the computer my fingers are so cold (and slightly numb) that I’m having a hard time typing. Yesterday I could see my breath in the morning. I’ve had to dig out the flannel shirts and sweat shirts again. (‘Course if it was winter I’d be wearing a short sleeved t-shirt–it’s only getting down in the low fifty’s or high forty’s!)

The Amazing and Famous Plucker Project
Well I finally finished it. It’s been a kinda long process, I started gathering parts in February, but I took a few breaks too (some longer than others!) –to help some friends with lambing, to wait for more parts to come and to work on other things. However The Whizbang Tub-Style Mechanical Chicken Plucker is now complete and ready to try out (I even added a couple of up-grades–one was in the plan book and one I came up with my self.) And so without further ado…(drum roll please)…here’s a picture:

DSCN9924
As y’all can see, it’s quite nice, if I do say so myself! You can also see that I added the “Mobile Whizbang” option. Here it is in action:

DSCN9918

That blue plastic tub was just the right size to cover up the motor (which must weigh about 50 lb!) This is a sideways picture of the bottom pulley’s etc. Right now I have the wrong idler pulley on there-it’s a v-grove and I need to replace it with a flat one, but it works….

DSCN9920

And now for my own innovation…..see if ya can guess what it is from this picture:

DSCN9923

Here’s another clue….

DSCN9930

What you are looking at is….A rigged up spray ring (so ya don’t have to stand there with the hose for the ten or fifteen seconds it takes to pluck a couple of birds–just flip the lever! Who has time to stand around and wait for ten whole seconds!?! ;-) )

What I did is took an old hose (hard rubbery plasticy stuff) and hooked to the 1/2″ ball valve. Then I mounted the ball valve to the plucker frame with plumber’s strap, and the hose to the plucker tub with the ever handy zip ties. Finally, I cut little one inch slits in the hose so that is sprays like this:

DSCN9933

And then when you flip the power switch as I’m doing in the above picture…

DSCN9935

I think that the thing might take a few feathers off! I can hardly wait till the broilers are ready now:

DSCN9975

There they are in the Joel Salatin style chicken tractor. It has three doors–two on the front and one big one on the back which is covered with a PVC roofing material. The pen is fairly light–without the doors on I can stand in the middle and pick it right up and carry it. On the ground though, it drags a lot because of the width (digs into the ground)…so I cobbled up a dolly for it:

DSCN9981

It’s made out of an old push lawn mower and a couple of boards. Make it do or do with out! I basically just took the handle and bolted the wheels to it. (that did end up needing some reinforcing to keep the wheel straight–weld a piece of pipe between ’em) Then I took that pesky kill switch handle thingy, and used it to hold the board at the proper angle.

I’ve also been working on some butchering tables and such (with a lot of help from the gentleman from church that gives me lumbar). I think that it’s safe to say that I’m the only one in the county with furniture grade butchering tables! This one holds two (out of three) pieces of slate counter top that another friend gave me. It’s about six feet long. Made out of planned ash boards. [He doesn’t do plugging and touch sanding though… :(

DSCN9917

Here’s a few other things:

DSCN9988+(2)

That would be the Whizbang Garden cart pieces in the bushes, and the two height (sitting or standing) single stand, and the fully adjustable killing cone stand. (plus a few odds and ends!) Here’s a close up of the singe stand:

DSCN9990+(2)

And in these two you can see how the cone stand adjustment works:

DSCN9996+(2)

DSCN9992+(2)

The guy helping me does very poor work as you can see! (insert extreme sarcasm into that last sentence if ya haven’t already) He doesn’t have any tools either. For instance the back of the single stand are held together in part by two biscuits (wooden kind–ya wouldn’t want to eat ’em!) which were cut out with a nifty little biscuit cutter outer jobber thing. I’m very pleased with how the stuff turned out.

He also has an old cast iron double sink with drain board that he is going to give me. (Did I mention that he’s pretty generous?) Then I’ll just need to figure out how to rig up the foot operated water switch….

Well I’m out of time this morning. I get to go help worm sheep today :-)

Until next time,

May He who is able to keep you from falling make your way straight, and rescue you from all ungodliness.

Matthew

Tags: Butchering Tables, Chicks, Matthew, Plucker
CONTINUE READING >
2 comments

About Us


Matthew Potter


Jonathan Potter

Subscribe by Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

RSS

  • RSS - Posts
  • RSS - Comments

Our Other Websites

  • PotterVilla Pastures
  • PotterVilla Applied Technology
  • PotterVilla Academics
  • PotterVilla Acoustics
  • PotterVilla.net
  • The Chief Mandate

Friends

  • The Deliberate Agrarian
  • Munck's Quiver
  • Bartlett Farm
  • Man of Courage
  • TN Farmgirl
  • Sugar Mtn. Farm

Fellow Workers

  • Generations with Vision
  • NCFIC
  • Heart Cry

Helpful Resources

  • Generations with Vision
  • Grace Community Church
  • Moody Church Media
  • Chapel Library

Slideshow

This slideshow requires JavaScript.

Recent Posts

  • The Great Move of 2014 – Episode 3, Trailer Loading
  • The Great Move of 2014 – Episode 2, Barn Moving
  • The Great Move of 2014
  • A Lovely Morning!
  • Winter visits after all….

Recent Comments

  • Munck Family on Jack Frost….
  • Parris Family on It’s a snowy life
  • Marcy on Merry Christmas Y’All
  • Anonymous on An in-progress video walk through my "downtown" office!
  • The Munck Family on A Day in the Life…..

Archives

  • March 2015
  • February 2015
  • January 2015
  • December 2014
  • November 2014
  • May 2014
  • March 2014
  • February 2014
  • January 2014
  • December 2013
  • August 2013
  • July 2013
  • May 2013
  • April 2013
  • March 2013
  • February 2013
  • January 2013
  • December 2012
  • April 2012
  • February 2012
  • August 2010
  • April 2010
  • March 2010
  • February 2010
  • January 2010
  • December 2009
  • September 2009
  • August 2009
  • July 2009
  • June 2009
  • February 2009
  • January 2009
  • December 2008
  • November 2008
  • October 2008
  • September 2008
  • August 2008
  • July 2008
  • June 2008
  • May 2008
  • April 2008
  • March 2008
  • February 2008

Tag Cloud

Annoucements Baxter Bird Brooder Chickens Chicks Christmas Dad Dog DSL Easter Fall Fall Colors Family Fields Flowers Food friends Garden God is Good Grama hoop house Jonathan Mathew Matthew Miscellaneous Music Piano Plant starting Plucker S / E SAICFF Snow Snowfall Spring Sunrise Sunset Taxes The Great Move of 2014 Tomatoes Tools Weather Wind Winter Winter storm

Categories

    No categories

Meta

  • Log in
  • Entries RSS
  • Comments RSS
  • WordPress.org
PREV 1 … 10 11 12 … 15 NEXT